Multipurpose Cleaner
Technical Data Sheet (TDS)
Product: Multipurpose Cleaner Spray — 250 ml/400ml Aerosol
Product Code:
250 ml: KS-MPC-250
400 ml: KS-MPC-400
Manufacturer: K S Aerosol Industries, Ahmedabad (for private-label/contract manufacturing)
Revision: 01
A ready-to-use, fast-acting aerosol cleaner specifically formulated to remove dust, grease, fingerprints, soot and light grime from uPVC (also written as UPVC / uPVC) windows, doors, frames and exterior trims. Leaves a streak-free, non-tacky finish and restores original appearance without damaging uPVC surfaces.
Fast, streak-free Multipurpose cleaning • 250 ml/400ml aerosol — convenient spray • Safe for uPVC frames & trims • Leaves surface clean and protected.
Rapid removal of common soils (dust, grease, fingerprints, road film)
Streak-free drying — no sticky residue
Safe on uPVC — non-etching, non-abrasive formulation
Convenient aerosol delivery for spot and edge cleaning
Low-odour, quick evaporation for fast turnaround
Ideal for both retail and contract/private label supply
uPVC window and door frames (interior & exterior)
uPVC trims and cladding
Pre-installation / post-installation cleaning of frames
Maintenance cleaning for residential and commercial properties
Automotive interior hard plastic trims
Shake can well for 10–15 seconds.
Hold can 20–30 cm (8–12 inches) from the surface.
Spray a light even coat onto the soiled area or onto a clean, lint-free cloth.
Wipe with a soft cloth or microfibre towel until surface is clean and dry. For heavy soil, repeat as necessary.
For best results, test on a small, inconspicuous area first. Avoid prolonged contact with rubber seals; wipe immediately if overspray occurs.
Coverage: Approx. 4–6 m² per 250 ml can depending on soil level and application method (typical).
Form: Pressurised aerosol (spray)
Can size / Net fill: 250 ml/400ml (net)
Appearance: Clear to pale liquid / fine spray mist
Odour: Low, solvent-type (non-offensive)
pH : 8.0 – 10.0
Evaporation: Rapid (fast drying)
Propellant: Hydrocarbon blend (e.g., butane/propane) — flammable.
Shelf life: 18 months from date of manufacture when stored as recommended.
Primary packaging: 250 ml tinplate aerosol can with actuator, cap and valve suitable for aerosol use.(custom/private label available).
Store upright in a cool, dry, well-ventilated area.
Keep away from heat, sparks, open flames and hot surfaces — No smoking.
Protect from direct sunlight; do not expose to temperatures exceeding 50 °C.
Do not puncture or incinerate even when empty.
UN Number: UN 1950 (Aerosols).
ADR / IMDG / IATA: Flammable aerosol — packaging, labeling and documentation to follow applicable transport rules.
Regulatory: Product labeling complies with local CLP/GHS requirements (hazard pictograms, signal word, hazard & precautionary statements). Manufacturer will assist with country-specific SDS/MSDS and regulatory testing on request.
Hazards: Pressurised container. Flammable. May cause eye irritation. Avoid inhalation of spray mist.
First aid:
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Seek medical attention if irritation persists.
Skin contact: Wash with soap and water. Remove contaminated clothing.
Inhalation: Move to fresh air. If breathing is difficult seek medical attention.
Ingestion: Do NOT induce vomiting. Seek medical attention immediately.
Personal protective equipment (PPE): Gloves and safety glasses recommended for bulk handling and filling operations.
Disposal: Dispose of contents/container in accordance with local regulations. Do not puncture or incinerate can.
Note: A full Safety Data Sheet (SDS/MSDS) with complete hazard, handling and toxicological information is available on request.
Manufactured in controlled aerosol filling lines (K S Aerosol Industries) with in-process checks for fill weight, valve function, spray pattern and leak testing.
Product released only after QC checks (appearance, spray performance, pH, weight, can integrity).
Performance testing (adhesion, compatibility) available as a customer service for private label orders.
Custom fragrance, labelling and can artwork available for minimum order quantities.
Options: custom SKU, specific valve/actuator types (fine mist, stream), tamper seals, and bulk packing.
Lead times and MOQ will be quoted on enquiry.
For full SDS, lab test certificates, VOC data, private label pricing, or to request a sample and lead time, please contact:
K S Aerosol Industries — Technical Sales
7026730226
sales@ksaerosolindustries.in
The information contained in this Technical Data Sheet is based on current knowledge and experience. It is intended to provide general guidance for product handling, usage and storage. Values are typical and do not constitute a product specification. For contractual specifications, regulatory compliance or formulation disclosure please request a formal specification sheet and SDS.
